U.S. chain’s initial CO2 installation operates efficiently during peak summer temperatures.
Adiabatic gas coolers that helped improve the efficiency of the transcritical CO2 system at a Weis Markets store in Randolph, N.J., U.S.
U.S. chain Weis Markets reported that a transcritical CO2 refrigeration system installed at a 54,000ft² (5,017m²) store in Randolph, N.J., has “not once” entered less-efficient transcritical mode over the first year of operation, including during summer months when ambient temperatures exceeded 100°F (38°C).
The report was provided by Paul Burd, manager of refrigeration engineering for the Mid-Atlantic chain of 204 grocery stores, at the Food Marketing Institute’s Energy & Store Development Conference, held in Dallas, Texas, U.S., September 8-11.
Weis has been monitoring the energy performance of the Randolph store since it opened in July 2018. Burd offered data covering one year of operation, from August 1, 2018 through July 31, 2019, as well as from August 25-September 5, 2019.
Because of its low critical-point temperature (88°F/31°C), CO2 at high ambient temperatures becomes a supercritical fluid that can’t be condensed by an air-cooled condenser (the transcritical mode). To avoid that scenario Weis installed two adiabatic gas coolers from Baltimore Aircoil (BAC) on the roof of the store, which employ water at higher ambient temperatures to keep the CO2 below its critical-point temperature.
Burd attributed the system’s ability to avoid transcritical operation to the adiabatic gas coolers. “Our concern was going into transcritical mode,” Burd said. “I wanted to be sure as much as I could that we didn’t go into transcritical mode, so we chose the adiabatic gas coolers.”
He noted that the adiabatic gas cooler employs water when the ambient temperature exceeds 70°F (21°C), which generally happens two-to-three months out of the year. The water recirculates so that fresh water use is limited. Below 70°F, the adiabatic systems works like an air-cooled condenser.
Weis’s transcritical CO2 rack, an Advansor unit from Hillphoenix, employs three low-temperature and five medium-temperature compressors, with a CO2 charge of 1,100lbs (499kg). It supplies a low-temperature capacity of 343.2 kBTU/hr at -24°F (-31°C), and a medium-temperature capacity of 1,137.3 kBTU/hr at 19°F (-7°C). The system includes heat reclaim for HVAC and water.
Read this article in its entirety in the October 2019 issue of Accelerate Magazine.
“I wanted to be sure as much as I could that we didn’t go into transcritical mode, so we chose the adiabatic gas coolers."
Paul Burd, Weis Markets